Precision Pro

The Precision Pro 1-Piece Mount is suitable for scopes with a 30mm or 1" tube (inserts included). The Ring Mount is CNC-machined & made from 6061-T6 Alloy allowing for high strength yet with a sleek design. 

Specifications:

• Fits 1" & 30mm Scopes
• 1"/30mm to Picatinny 
• 1-Piece Ringmount
• CNC-Machined 6061-T6 alloy composition
• Scope Tube: 1" or 30mm
• Included 4 inserts for 1" scope tubes
• MilSpec Type-III Hard Coat Anodized
• Includes Torx Hex key
• Weight: 159 g

Attach any picatinny or weaver based tactical accessory to a firearm without obscuring your optic with this lightweight 45 degree offset rail. Perfect for firearms that don't come factory with side rails or bottom rails.

Features:

• Perfect for mounting torches, lasers, red dots, and reflex sights.
• Comes with allen wrench for easy installation.
• Strong & durable anodized alloy
• Matte black finish to match rail and accessory colour
• Weighs only 51 grams

Precision Pro picatinny base for the Alfa carbine revolver action rifle. A 1 piece base is the best way to have a solid foundation for your scope or optic. As apposed to a conventional 2 piece base, a single base features less parts involved in connection to your rifle's receiver; this creates a strong platform for any optic, which is important for any rifle to be accurate. 

Fits Alfa Carbine rifle revolvers.

Specifications:

• 7075/T6 alloy composition
• 0 MOA
• One-piece base
• Length: 10.5cm
• Matte finish
• Includes allen key and mounting screws

Precision Pro picatinny base for Browning X-Bolt rifles.

Specifications:

• One-piece 7075 T6 aluminum 
• Full cross slots
• Hard oxidization finish 
• 20 MOA Long Action
• Length: 179mm
• Includes allen key and screws

Precision Pro picatinny base for Browning X-Bolt rifles.

Specifications:

• One-piece 7075 T6 aluminum 
• Full cross slots
• Hard oxidization finish 
• 20 MOA Short Action
• Length: 179mm
• Includes allen key and screws

Precision Pro picatinny base for Browning X-Bolt rifles.

Specifications:

• One-piece 7075 T6 aluminum 
• Full cross slots
• Hard oxidization finish 
• 0 MOA Super Short Action
• Length: 179mm
• Includes allen key and screws

Precision Pro 2 piece base for the Howa 1500 rifle. Fits all calibers short and long action. 

Specifications:

• Fits single crossbar weaver and picatinny screws
• 7075/T6 alloy composition
• 0 MOA
• Low profile
• Two-piece base
• Matte finish
• Includes mounting screws (torx key not included)

25in/lb of torque is recommended for installation.

Precision Pro picatinny base for the Howa 1500 mini action rifle. A 1 piece base is the best way to have a solid foundation for your scope or optic. As apposed to a conventional 2 piece base, a single base features less parts involved in connection to your rifle's receiver; this creates a strong platform for any optic, which is important for any rifle to be accurate. 

Fits 223 Howa mini, 7.62x39 Howa mini, 300 BLK Howa mini, 450 BM Howa mini.

Specifications:

• 7075/T6 alloy composition
• 0 MOA
• One-piece base
• Length: 15cm
• Matte finish
• Includes allen key and mounting screws

Precision Pro Howa 1500 Short Action 0 MOA Picatinny Base

Precision Pro M-Lok Bipod Mount is the perfect addition to any firearm with M-Lok interface system. It makes adding a swivel stud mounted bipods a breeze. Includes installation hardware.

Ideal for use on:
• Hammerli Tac R1
• Smith & Wesson M&P15-22 with M-Lok handguard
• Ruger Precision with M-Lok
• Tikka T3X Tac A1
• MDT chassis with M-Lok.

Fit your M-LOK forend to mount directly on a tripod.

Specifications:

• CNC-Machined 6061-T6 Alloy 
• Mil-Spec Type III Anodized
• Can fitted to most M-LOK forends to mount directly on a tripod
• Compatible with Precision Pro Tripod Rifle Clamp 30-66mm
• Included Torx Hex key
• Dimensions(LxWxH): 88 mm x 39 mm x19 mm
• Weight: 42 g

Accessorize your rifle with the Precision Pro M-Lok Torch Mount with Rail.

This torch mount allows you to mount any torch that has a body tube width of 1", 27mm or 30mm to your M-lok rail. This M-lok torch mount kit also has the M-lok rail separate so you can alternatively mount any weaver/picatinny style optic or laser accessory.

Features:

• 5 Slot weaver rail
• Comes with allen wrenches for easy installation
• Strong & durable anodized alloy
• Includes shims to fit 1", 27mm, & 30mm tubes
• Fits to any M-lok stock

Ideal for use on:

• Hammerli Tac R1 with M-Lok
• Tippmann M4-22 Elite with M-Lok
• H&K 416 with M-Lok
• Smith & Wesson M&P 15-22 with M-Lok
• Ruger Precision with M-Lok
• Tikka T3X Tac A1 with M-Lok
• MDT chassis with M-Lok.

Featured in the images is the Led Lenser P7 Core torch

Multi-use Precision Pro picatinny base & mount for the Ruger 10/22 rifle. Allows scope or red dot optic mounting versatility to install onto this rail. Easy to install on any Ruger 10/22. 

Specifications:

• 11 Slot one-piece rail
• Length: 4.5"
• Made from 7075/T6 aluminium alloy
• Milspec coating
• Includes allen key and screws

Precision Pro 3/8" to picatinny rail. Fits any rifle with a 3/8" dovetail 2 groove receiver rail. 

This mount conversion rail enables a wider spectrum of options in using either weaver or picatinny rings, red dot and holographic optics, and even thermal/night vision scopes. Perfect for many air rifles and rimfire rifles. A 1 piece base is the best way to have a solid foundation for your scope or optic. As apposed to a conventional 2 piece base, a single base features less parts involved in connection to your rifle's receiver; this creates a strong platform for any optic, which is important for any rifle to be accurate. 

Specifications:

• Milspec type lll hard coat black anodized 6061 T6 alloy
• One-piece base
• Length: 15cm
• Matte finish
• Includes allen key and clamping screws

Precision Pro picatinny base for the Tikka T1X rimfire rifle. A 1 piece base is the best way to have a solid foundation for your scope or optic. As apposed to a conventional 2 piece base, a single base features less parts involved in connection to your rifle's receiver; this creates a strong platform for any optic, which is important for any rifle to be accurate. 

Specifications:

• 0 MOA, 20 MOA or 40 MOA
• 14-slot
• One-piece picatinny
• Length: 150mm 
• Made from milspec type lll 7075/T6 hard coat anodized aluminium alloy
• Includes allen key and screws

Precision Pro picatinny base for Tikka T3/T3x rifles. Available in 0 or 20 MOA. Featuring a built-in recoil lug for the most secure mount. Perfect for high recoil calibers such as 300 winchester magnum and 7mm remington magnum

What base do I choose, 0 MOA or 20 MOA?

Most hunters usually do not require anything more than a 0 MOA base so we suggest in theory to consider a 20 MOA base only if you intend on mainly shooting past 500 meters. 20 MOA rails are made for long range rifles and are slanted to give you more elevation to aide with your limited scope adjustments. 

Specifications:

• 0 MOA or 20 MOA
• Built-in recoil lug for secure mounting
• One-piece 7075 T6 aluminum 
• Length: 169mm
• Includes allen key and screws

Precision Pro picatinny base for Tikka T3/T3x rifles. Available in 0 or 20 MOA. Featuring a built-in recoil lug for the most secure mount. Perfect for high recoil calibers such as 300 winchester magnum and 7mm remington magnum

What base do I choose, 0 MOA or 20 MOA?

Most hunters usually do not require anything more than a 0 MOA base so we suggest in theory to consider a 20 MOA base only if you intend on mainly shooting past 500 meters. 20 MOA rails are made for long range rifles and are slanted to give you more elevation to aide with your limited scope adjustments. 

Specifications:

• 0 MOA or 20 MOA
• Built-in recoil lug for secure mounting
• One-piece 7075 T6 aluminum 
• Length: 169mm
• Includes allen key and screws

Turn any tripod into a rifle rest instantly! 

Use any tripod as a rifle rest with this adjustable rifle clamp. Fits both 1/4" & 3/8 tripod mounts, and also includes M-LOK slots for use with the Precision Pro ARCA Rail Adaptor

Specifications

• CNC-Machined 6061-T6 Alloy 
• Mil-Spec Type III Anodized
• Pictured and compatible with the Precision Pro ARCA Rail Adapter
• Widest fit 66 mm
• Narrowest fit 30 mm
• Will fit both screw sizes (1/4" & 3/8) for mounting
• Weight: 380 g

Please note that it does not come with the pictured Precision Pro ARCA Rail adapter

Accessorize your rifle or shotgun with this incredibly handy barrel/magazine/scope tube weaver rail clamp from Precision Pro! This accessory enables you to add a flashlight, laser sight, torch or forend grip to your firearms. This is particularly useful when your firearm does not have an underside rail from the factory. The clamp is adjustable from rimfire barrels to shotguns.

• Easy to install
• Tight mounting due to 3 adjustable screws
• 6063 Alloy composition
• 40mm Rail length
• Fits to barrels, magazine tubes or 1" tube scopes

We recommend buying the Outdoor Outfitter quick detach torch mount for this clamp on rail: web search SKU: 148027
With the torch mount, we recommend buying the Led Lenser P7 Core flashlight for this clamp on rail: web search SKU: 170262
We recommend buying the Night Saber laser sight for this clamp on rail: web search SKU: 235010