Night Saber 240V/1A Wall Charger For 8000mAh Power Bank

This is a 100 Watt spare halogen bulb from Outdoor Outfitters for spotlights.

Replacement or spare 12v 100 Watt bulb, brand new.

This will fit the Outdoor Outfitters and LightForce spotlights.

Typical uses include hunting, fishing, boating, camping, security, military and police, Emergency services, driving lights, trucks, cars, utilities, agricultural, rally cars, surveillance and the observation of nocturnal animals.

LED LENSER® P3 is the twin brother of LED LENSER® P2, but due to its bigger lamp head, it has an increased lighting range. The Blue Moon Focus System allows for quick transition from circular low beam to focused long distance light. The lamp’s ergonomically perfect clip is as convincing as its battery concept: one alkaline battery (AAA micro cell) costs about 25 Eurocent at the discount store and supplies power for many hours of light.

Specifications:
LED: 1 x Nichia High End
Length: 94,5 mm
Weight: 42 g
Luminous flux: 13 lm
Batteries: 1 x AAA
Energy tank: 1,8 Wh
Burning life: 40 h

Our Led Lenser products are 100% genuine with a full 5 year NZ importer warranty. Each unit has a unique serial # to ensure its authenticity. (Beware of the
fakes out there at the moment.)

Click here to view the Lenser Comparison Chart

* Luminous flux (lumens) resp. max beam distance (meters) in the brightest function when switching on with new set of fresh alkaline batteries.
Average values, may vary +/- 15% depending on type of chip and batteries.
** Average hours of burning life as measured in the least energy-consuming mode and until residual luminous flux amounts to 1 lumen.

(170217)

The Outdoor Outfitters Torch Scope Mount for LED Lenser and Coast Torches

After getting frustrated with the lack of mounting options for the most popular LED Torches we have come up with a fantastic easy to use mount. The black anodized aluminium finish matches the torch and any standard black scope’s finish.

Simply mount the included Quick-Detach scope ring onto any 1" or 30mm scope tube. Then fit the torch mount's weaver base to the scope ring. These are easy to install and mean you can easily remove your torch for the times when you don't need it shooting.

The torch mount is 30mm in diameter. But also works on the 1” body of the Olight torch in reverse with the 1” adapter on the mount side and the 30mm ring mounted to a 30mm scope.

Includes:
• 30mm Quick-Detach Scope ring
• 1" Inserts for Scope ring
• Torch Mount to fit Fits M7, M7R, M7RX, MT7, P7, P7.2, P7QC, T7, T7.2, T7M, X7R, Coast HP7. or any 30mm Torch Body
• Allen Keys to fit.

Extend your visibility long after sundown with this curved LED light bar, perfect for your truck, Ute, boat or ATV. Use alone or combine with other Night Saber light bars for a full, wide-arc lighting solution for off-roading hunting or driving in extreme conditions.

Features:
• LED Power: 300W
• Operating voltage: 10-30V DC
• Waterproof rating: IP 67
• 100 x 3w high-intensity Epistar LEDs
• Colour temperature: 6000K
• Material: Diecast aluminum housing
• Lens material: Polycarbonate
• Mounting bracket: Aluminium firm bracket
• Beam: 8° Spot / 15° flood / combo
• 30,000+ hours lifetime
• Width: 1295mm.

Includes mounting hardware and tools; some assembly required.

240-volt wall charger for the Night Saber 120mm, 27-watt rechargeable handheld LED spotlight.

Features:
• For use with the Night Saber 120mm, 27-watt rechargeable handheld LED spotlight
• Input: AC 100-240V; 50/60Hz 0.8A
• Output: 8.4V; 1000mA.

These batteries are maintenance free, easy to handle, rugged and economical. It has a characteristic of high discharge rate, wide operating temperature, long service life and deep discharge recovery.

Absorbent Glass Mat (AGM) technology for superior performance.
Valve regulated, spill proof construction allows safe operation in any position.

Specifications:
- Chemistry Lead Acid
- Capacity 5Ah
- Rating whr 30
- Cellnum 3
- Connector SP
- Dimensions (L x W x H): 2.64 x 2.64 x 3.94 inches
- Weight: 2.10 lbs
- Upc 813340010123
- Warranty: 1 Year

M23 remote pressure switch. Can be used in firearms mount. There is no any noisy "clickie" sound and you could operate it very well even with gloves.

Features:
• Low click noise, long life electronic switch
• Coiled cable stretches from 9.8 in / 25cm to 31 in / 80cm\
• Extremely low standby current
• For the M23 and M3XS-UT flashlights

Night Saber battery terminal adaptor with cigarette lighter to spade fitting.

Awesome new 100 Watt Night Saber Handheld light weight polymer spotlight. Fitted with a 150mm reflector. The beam is fully adjustable, so you can get the spot just how you like it. A coil cord is utilised and stretches the 2.5m cigarette lighter plug is fitted to. Rubberized grips with a finger trigger switch for off and on, and it utilises the twin prong bulb system found in most other top quality lights. These are light, strong and very well made, and offer excellent value for money.

Features:
- Operation Voltage - 12V-24V
- 150mm Lens
- Adjustable focus lens
- 100 watt globe
- Impact resistant body and lens
- On/off switch on handle Rubber soft touch handle
- Clip-on lens filters available
- Lightweight for easy use
- 3.5 metre lead with fused accessory plug
- 100 metre + range
- Ideal for hunters, campers, boating, emergency services etc.

5.5m vehicle battery extension cord from Night Saber features alligator clips on one end and a female cigarette adaptor on the other end.

Specifications:
• Extension cord with positive and negative battery clamps at one end, accessory adaptor at the other
• Works with any item that plugs into a standard vehicle accessory socket
• 5.5 metres long

Outdoor Outfitters Torch Scope Mount quick detach - ring only

The black anodized aluminium finish matches the torch and any standard black scope’s finish.

These are easy to install and mean you can easily remove your torch for the times when you don't need it shooting.

Includes:
• 1" Inserts for Scope ring
• Allen Keys to fit

The Outdoor Outfitters Quick-Detach Torch Scope Mount for LED Lenser P14 or any 35mm Torch.

After getting frustrated with the lack of mounting options for the most popular LED Lenser Torches we have come up with a fantastic easy to use mount.

The black anodized aluminium finish matches the torch and any standard black scope’s finish.

Simply mount the included scope ring onto any 1" or 30mm scope tube. Then fit the torch mount's weaver base to the scope ring.

These are easy to install and mean you can easily remove your torch for the times when you don't need it shooting.

The torch mount is 35mm in diameter

Includes:
• 30mm Quick-Detach Scope ring
• 1" Inserts for Scope ring
• Torch Mount to fit P14, P14.2 or any 35mm Torch
• Allen Keys to fit