Lighting

The magnetic, mountable motion sensing safe light from Boston Security will be the ultimate addition to a large gun safe.

Easy to install; simply placed it in the desired location and the magnet located on the back creates an instant, non-permanent bond (also included magnetic strip for metal, screws for wood & drywall, hook & loop strip for carpet). The 12 ultra-bright LEDs are powered by 3 AA batteries (not included) which means no wires to deal with, making it ideal for safes that are located deep in cupboards and other dark places.

There will be no more fumbling around with torches or trying to find a light switch in the dark as the built-in motion sensor activates to light for 30 or 60 seconds once any motion has been detected.

Also great for the inside cupboards at home or inside a poorly lit wardrobe. 

Features:

• 3 options for installation with all hardware included: magnetic strip for metal, screws for wood & drywall, hook & loop strip for carpet
• Rotatable directional lenses
• Motion sensor: turns on automatically when safe or cabinet door is opened
• Auto-off when door closes (30 or 60 second timer)
• powered by 3x AA batteries (sold separately)
• 12x LED
• 30x6x3 cm (length x width x height)

The Marine Hunter 700 from Night Saber is a 100% waterproof (IP67 rated), hand-held spotlight capable of pumping out 700 lumens of light to up to a distance of 400 metres. Features three modes of operation; high (700 lumens), low (350 lumens), or flash, the Storm Hunter is housed in a shockproof ABS case that floats! So if you're unfortunate enough to drop it overboard not only will the be unaffected but also retrievable.

Features:
• Waterproof trigger switch
• Red charging indicator with overcharge protection
• Shockproof, floating ABS case with non-slip TPR coating
• Wrist strap with SOS whistle

Specifications:
• Bulb: 7W Cree® LED, XM-L2 type
• Brightness: 700lm (high), 350lm (low)
• Beam distance: 400m max.
• Lighting modes: High / Low / Flash
• Water / Dust rating: IP67 -1m water/dust proof rated
• Lens: Shockproof polycarbonate
• Battery: 3.7V, 2200mAh Li-ion rechargeable, 12V DC and 240V AC chargers included
• Runtime: 2-hours in HIGH mode. 4½-hours in LOW mode, 5-hours in FLASH mode.

Awesome new 100 Watt Night Saber Handheld light weight polymer spotlight. Fitted with a 150mm reflector. The beam is fully adjustable, so you can get the spot just how you like it. A coil cord is utilised and stretches the 2.5m cigarette lighter plug is fitted to. Rubberized grips with a finger trigger switch for off and on, and it utilises the twin prong bulb system found in most other top quality lights. These are light, strong and very well made, and offer excellent value for money.

Features:
- Operation Voltage - 12V-24V
- 150mm Lens
- Adjustable focus lens
- 100 watt globe
- Impact resistant body and lens
- On/off switch on handle Rubber soft touch handle
- Clip-on lens filters available
- Lightweight for easy use
- 3.5 metre lead with fused accessory plug
- 100 metre + range
- Ideal for hunters, campers, boating, emergency services etc.

5.5m vehicle battery extension cord from Night Saber features alligator clips on one end and a female cigarette adaptor on the other end.

Specifications:
• Extension cord with positive and negative battery clamps at one end, accessory adaptor at the other
• Works with any item that plugs into a standard vehicle accessory socket
• 5.5 metres long

The Outdoor Outfitters Quick-Detach Torch Scope Mount for LED Lenser P14 or any 35mm Torch.

After getting frustrated with the lack of mounting options for the most popular LED Lenser Torches we have come up with a fantastic easy to use mount.

The black anodized aluminium finish matches the torch and any standard black scope’s finish.

Simply mount the included scope ring onto any 1" or 30mm scope tube. Then fit the torch mount's weaver base to the scope ring.

These are easy to install and mean you can easily remove your torch for the times when you don't need it shooting.

The torch mount is 35mm in diameter

Includes:
• 30mm Quick-Detach Scope ring
• 1" Inserts for Scope ring
• Torch Mount to fit P14, P14.2 or any 35mm Torch
• Allen Keys to fit

From Backyard Parties to Camping Trips and More! No matter the occasion, the Klarus CL3 was built for convenience. Utilizing a color temperature range between 4000K and 1300K, the CL3's 4 brightness modes offer multi-use capabilities for use whether in the backyard or camping off the grid. This light outputs a max of 280 lumens, ensuring your entire group has more than enough brightness for nighttime activities. Special Pulse Mode activation outputs a 1300K orange color temperature with light cycling that naturally relaxes your body and mind, equipped with a 20-minute auto-shutoff to boot.

Mount and carry the CL3 via the magnetic top, metal hook, and even a 1/4-inch threaded hole for placing on a tripod. With three unique ways to mount, the CL3 has an exceptional user-friendly design that fully supports your outdoor adventure or backyard bash. Coupled with a push button side switch, this light is easy to operate.

The CL3 is built with an internal 2,600mAh 18650 battery pack which can be easily recharged via an in-body USB-C port. This battery pack supports runtimes of up to 13 hours on its lowest setting, so your lantern light can always uphold ambient illumination.

Specifications & Features:

• Modes: Four settings – 1300K orange light (50 lumens, 13 hours), 2700K warm light (110 lumens, 10 hours), 4000K white light (280 lumens, 5 hours), and 1300K pulse mode
• Produces 3 colour temperatures, and 4 brightness settings, catering to diverse lighting needs.
• Type-C rechargeable
• Low power consumption, ensuring long-lasting performance.
• IPX5 Waterproof and shockproof
• Carabiner-style hook attachment for hanging
• Magnetic top to attach to metal surfaces
• Easy operation with one push button
• Pulse mode design for sleep assistance and relaxation, coupled with a 20-minute auto-shutoff
• LED: 6x 5730 LEDs and 12x 2835 LEDs
• Performance: Max 280 lumens, illuminates up to 153.94 sqm
• Charging: USB Type-C charging (4.2 hours)
• Battery Life: Equipped with a 18650 battery (3.7V 2600mAh)
• Lightweight: weighs only 201.5g
• Size: 83.9mm x 161.1mm

The perfect companion for your Night Saber rifle mounted Strike torch. This allows you full control right where you want it. The coiled cord stretches from 31cm up to 60cm. The waterproof rubberized switch has multiple buttons for ease of reach. The buttons will turn the unit ON/OFF or 2 fast clicks for strobe. 

Simply unscrew the end cap from your Night Saber Strike torch and replace it with the remote switch upgrade. 

The Outdoor Outfitters Torch Scope Mount for LED Lenser and Coast Torches

After getting frustrated with the lack of mounting options for the most popular LED Torches we have come up with a fantastic easy to use mount. The black anodized aluminium finish matches the torch and any standard black scope’s finish.

Simply mount the included Quick-Detach scope ring onto any 1" or 30mm scope tube. Then fit the torch mount's weaver base to the scope ring. These are easy to install and mean you can easily remove your torch for the times when you don't need it shooting.

The torch mount is 30mm in diameter. But also works on the 1” body of the Olight torch in reverse with the 1” adapter on the mount side and the 30mm ring mounted to a 30mm scope.

Includes:
• 30mm Quick-Detach Scope ring
• 1" Inserts for Scope ring
• Torch Mount to fit Fits M7, M7R, M7RX, MT7, P7, P7.2, P7QC, T7, T7.2, T7M, X7R, Coast HP7. or any 30mm Torch Body
• Allen Keys to fit.

The Olight ROD is a remote pressure switch compatible with the Javelot Turbo and Warrior X Turbo. It simply screws onto the tail cap of your torch and gives you convenient control when using it on a rifle. It also comes with two adhesive patches for sticking the switch to your rifle. For the tactical advanage of being able to control your Olight odin without having to move your hand.

This switch can be used as a replacement or spare for the one that comes with the Odin and is also compatible with the Warrior X Turbo and Javelot Pro 2.
It attaches magnetically to the tail of the light, with no need to remove the tailcap switch, and locks in position. 

Features:

• Low click sound, long life pressure pad switch.
• Revolutionary push-to-lock remote switch for a tight fit.
• Coiled cable stretches from 9.8 in / 25cm to 31 in / 80cm.
• FIT: Olight Odin Series, Warrior X Turbo, Javelot 2 PRO

Control your Olight Warrior X Turbo flashlight without having to move your hand with this ROD-7 Remote Pressure Switch. This switch can be used as a replacement or spare for the one that comes with the Odin and is also compatible with the Warrior X Turbo. It attaches magnetically to the tail of the light, with no need to remove the tailcap switch, and locks in position. The actual switch rests in a flexible bracket that snaps into place on a Picatinny rail in a position that's convenient for you to reach.

The RWX is Olight's brand-new pressure switch built specifically for the Warrior X (& Pro), Javelot Pro and M2R - featuring a noiseless and a sensitive pad for perfect switch manipulation. The coiled cable extends the reach of the switch to around 0.8 meters.

Features:
• Low click noise, long life electronic switch
• Powerful magnetic attachment to your Olight torch
• Coiled cable stretch from 9.8" / 25 cm to 31" / 80 cm
• Extremely low steady current 
• Compatibility: Warrior X, Warrior X Pro, Javelot Pro and M2R

Bring the daylight with you with a compact, mount-anywhere lighting solution from Night Saber. Comes with x2 separate lights as pictured.

This powerful LED spotlight is perfect for use on ATVs, tractors, trucks, 4WDs, heavy equipment, and more, and its high IP68 dust and waterproof rating means it can handle tough conditions day in, day out.

95mm x 60mm x 75mm

Specifications Flood Light:

• Bulbs: 9x 3W 3030 LED, 27W
• Beam Type: Flood (60°)
• Brightness: 2000 lumens
• Voltage 9-32V DC
• LED Colour Temperature: 6000-6500K
• Working Life: 50,000 hours
• Waterproof Rating: IP68
• Working Temperature: -40° C - 80° C
• Includes mounting hardware and tool.

Specifications Spot Light:

• Bulbs: 9x 3W 3030 LED, 27W
• Beam Type: Pencil (30°)
• Brightness: 2000 lumens
• Voltage 9-32V DC
• LED Colour Temperature: 6000-6500K
• Working Life: 50,000 hours
• Waterproof Rating: IP68
• Working Temperature: -40° C - 80° C
• Includes mounting hardware and tool.

Turn your flashlight into a spotlight with this solid and comfortable grip from Night Saber! This pistol grip mount fit straight onto any torch or flashlight with a 1" or 30mm tube. Having a vertical grip allows for better comfort and control for the user.

As a bonus, the grip and ring can separate into a stand alone weaver rail foregrip to put on your rifle underside rail and a scope mounted weaver rail ring so you can mount a torch or red dot optic directly over your scope. 

The Olight D58 G is a red filter designed for use with the Olight Warrior X Turbo. This filter features a colored lens and rubberized fitting that fits securely over the head of the Warrior X Turbo. Red light filters are great for improving night vision for hunting, travel or tactics.

The Olight 21700 is a powerful Li-ion battery designed for use in the Olight flashlights such as the Warrior X. This battery can bring out the full power of your torch, keeping it charged up for extended periods of time. Li-ion chemistry is strong, stable and charges quickly

Specifications:

• Battery Size: 21700
• Battery Chemistry: Li-Ion (INR)
• Nominal Voltage: 3.6V
• Nominal Capacity: 5000mAh

The Night Saber 21700 is a powerful Li-ion battery designed for use in the Olight flashlights such as the Warrior X. This battery can bring out the full power of your torch, keeping it charged up for extended periods of time. Li-ion chemistry is strong, stable and charges quickly

Specifications:

• Battery Size: 21700
• Battery Chemistry: Li-Ion (INR)
• Nominal Voltage: 3.6V
• Nominal Capacity: 5000mAh

Charge your batteries on the go! 

With the Night Saber G2 Battery Charger, you can charge your batteries anywhere you can plug in to a powered USB port! USB cable included. 

The Night Saber G2 Battery Charger works with 3.7V rechargeable Li-ion and Li-polymer batteries: 18650, 26650, 32650, 18500, 18350, 17670, 16340.

Features:

• Keep your rechargeable batteries fully charged on the go
• Charge at home (USB adapter required), from any USB power bank, or in your car (USB adapter required)
• Charge two batteries at 1A once
• Battery light indicator
• DC input: 5V/2A MicroUSB
• DC output: 4.2V/1.0A x2

2.5m vehicle battery extension cord from Night Saber features a male accessory plug on one end and a female on the other end.

Specifications:
• Extension cord with mail accessory plug at one end; female accessory adaptor at the other
• Works with any item that plugs into a standard vehicle accessory socket
• 2.5 metres long

Night Saber 18650 Rechargeable Li-ION Battery

Specifications:
3.6V
8650
3400 MAH
Quantity: x1

Please be aware that these are specifically designed for our spotlight models. Please check the compatibility for other items.

New from Night Saber is this awesome little accessory every hunter/shooter needs for their set up, the Night Saber Universal Torch Mount.

Made from ultra-durable glass-fibre reinforced plastic, the Night Saber Universal Torch Mount adjusts at both ends to fit a variety of torches to almost any tube from 25mm to 34mm.

Not only is this the perfect torch mount versatile for any set up, it is super simple and easy to install and use. The Night Saber Universal Torch Mount allows you to easily remove your accessory when you don't need it.

Features and Specifications:
• Quick and easy set up
• No tools required
• Fits any tube from 25mm to 34mm
• Lightweight and strong
• Made from durable material
• 75mm between centers to fit over large-objective scopes

Night Saber power cord for 6500 lumen rechargeable model. Allows for constant use when hooked up to a cigarette insert. Good backup for when your battery runs out.