All Products

he Hornady M-2 Case Tumbler is the ideal tool for reloaders looking to remove abrasive foreign particles that can scratch the inside of reloading dies. Case tumblers clean and polish brass to a brilliant finish before loading. Your press and dies will operate more smoothly and your finished reloads will look like new, using the M-2 Tumbler.

Technical Information:
- Voltage:220 Volt (European Usage Only)
- Bowl Capacity: Up to 500-38 Special Cases
- Media Included: No
- Material: Bowl is plastic
- Note: Tumblers are not designed for tumbling loaded ammunition

The Burris Tikka T3/T3X Scope Rings are a ring solution specifically designed for the Tikka T3/T3X rifle. Burris mounts have long been favourites of custom gunmakers because of their solid strength, beauty, and custom fit. Each mount is precision machined to exacting tolerances and finished to perfection.

Durability is crucial to accuracy.    

• Brand: Burris
• Mount Type: 2 Piece, Fixed
• Width (Dovetail): Tikka

This CRKT two-handed camp axe with a hickory handle, hot forged blade, and spike end will make your life easier when you’re off the grid.

Ryan Johnson of RMJ Tactical in Chattanooga, TN designed the CRKT Woods Kangee™ T-hawk. A specialist in applying modern engineering to centuries old tool and weapon concepts, he is upping the ante once again with a new outdoor line of tomahawks that swing as big as the open wilderness where they’re found.

The design for this CRKT T-Hawk evolved from the popular and original tactical tomahawk series. But it’s built for battle with a few old Doug Firs. The CRKT Woods Kangee™ is made from a solid chunk of 1055 carbon steel that is hot forged into a rock-solid head and features a hammer finish. With primary and secondary edge bevels that are flat ground, it cuts through timber like a beaver. A spike on the opposite end splits ultra-tough wood knots like a boss.

The thick wood handle is made in the USA from Tennessee hickory. It's comfortable in hand and sealed with a lacquer coat that adds durability whenever you're in the backcountry—in other words, all the time.

Grab hold of the CRKT Woods Kangee™ T-Hawk and split some wood—like a cord’s worth.

Specifications:
• Blade Length: 4.21" (106.93 mm)
• Blade Edge: Axe w/Spike
• Blade Steel: 1055 Carbon Steel
• Blade Finish: Clear Lacquer
• Blade Thickness: 0.4" (10.16 mm)
• Overall Length: 19.13" (485.9 mm)
• Weight: 1.98 lb (0.9 kg)
• Handle: Tennessee Hickory
• Style: Tomahawk

Are you a brute and your untamed chopping power broke your CRKT® Woods T-Hawk handle? No problem. We have the replacement handle for your CRKT® T-hawk right here. This Tennessee hickory handle is the replacement handle for the Woods Chogan T-Hawk and the Woods Kangee T-hawk. It's made in the USA and sealed with a lacquer coat that adds durability when you're in the backcountry.

To replace the handle, remove the old handle by carefully placing the butt of the old handle on the ground and tapping the head of the T-hawk with a mallet until it slides down. To put the new handle on, slide the head onto the handle from the tapered end until it is seated on the thicker end of the handle. Next, hold the handle of the T-Hawk with the head down and hit the ground or a hard surface sharply several times to seat the head onto the handle. Changes in humidity may cause the head to become loose so be sure to check before use.

SPECIFICATIONS
Overall Length: 19" (482.6 mm)
Weight: 9.6 oz. (272.16g)
Handle: Hickory
Style: Accessory

Need a beautiful hand crafted leather sheath for your CRKT® Woods Kangee™ T-Hawk? We've got you covered.

The leather on this sheath is 6/7 oz. full-grained leather that is heavy duty and hand crafted in Oregon, USA. The leather is vegetable tanned and will not corrode metal. It has a hand oiled finish for durability and the seams are locked stitched with heavy weight nylon thread. The sheath protects the axe head and fits snugly and securely with two snaps. The belt loop fits belts with widths up to 1 ¾ inches.

This sheath only fits the CRKT Woods Kangee™ T-Hawk.

• Full-Grained Leather
• Hand Crafted in Oregon, USA
• Hand Oiled Finish For Durability
• Designed to fit CRKT Woods Kangee Tomahawk D2735

Need a spare or new sheath for your CRKT Provoke™ knives? We've got you covered.

Built out of a tough and durable vacuum-formed thermoplastic, this sheath will keep your hawk-bill blade safely stored in the nest until provoked. The sheath comes with a gear-compatible clip set that addresses belt and tactical necessities. The sheath fully protects the knife blade and secures to your liking with multiple clip and carry options. This sheath fits the CRKT Provoke™ knives

Specifications:
• Overall Length: 4.141" (105.18 mm)
• Weight: 1.10 oz. (31.18g)
• Style: Sheath
• Sheath Material: Boltaron

Built like a Bluefin. With a profile that suggests strong forward momentum and a blade shape that looks like a deep-sea carnivore, the CRKT Tuna™ everyday carry folding knife slices through packages and boxes faster than a Bluefin slices through the swell on a taut line.

Lucas Burnley was inspired by his newfound backyard when he sat down to sketch the Tuna™. Freshly settled in Cape Cod, Massachusetts, he designed the deep-belly drop point blade to be extremely versatile while mimicking the look of the powerful Bluefin tuna that roams the Atlantic. It’s met with a super grippy handle with G10 on the front and stainless steel on the back that excels in adverse conditions. The handle is set off with a bronze anodized pivot ring and backspacer. Deployed with a thumb stud, the blade stays securely in place with a frame lock.

Get the power of one of the world’s largest, fastest fish in your pocket.

Specifications:
• Blade Length: 3.22" (81.81 mm)
• Blade Edge: Plain
• Blade Steel: 8Cr14MoV
• Blade Finish: Stonewash
• Blade Thickness: 0.15" (3.68 mm)
• Overall Length: 7.69" (195.28 mm)
• Closed Length: 4.49" (113.92 mm)
• Weight: 3.70 oz. (104.89 g)
• Handle:  Front - G10; back - 2Cr13 SS
• Style: Folding Knife w/Frame Lock

The Septimo™ tactical folder was designed by a seasoned Green Beret to be more than a knife—he forged it of experience and created it to serve as a lifeline. CRKT's unique Veff Serration™ pairs with a powerful design to act as a strap cutter and utility knife. Serving 14 years as an American hero culminated in this deployment-prepared powerhouse.

Jeremy Valdez of Tampa, Florida brings combat experience and time serving in the 7th Special Forces Group to the aptly named Septimo™; a tribute meaning “seventh” in Spanish. The main motivation for this design arises from his 2009 deployment to Afghanistan. During combat operations, Jeremy was involved in a helicopter crash. In the chaotic aftermath, the small folder he had failed to perform when he was cutting straps and moving debris while pulling fellow soldiers out of the burning, tangled chopper wreckage.

Duty to his fallen comrades and brothers and sisters in arms drove him to design the Septimo™ with a quick flipper opening, a desert-proof black oxide finish, and friction points on the handles to help deal with inclement conditions. It was given a single Veff Serration™ for impressively effective strap cutting ability.

He finished off the look with a pivot point designed to mirror a six shooter revolver cylinder and a burly attachment clip built to survive hectic conditions.

Some are born of novelty. The Septimo™ is born of purpose.

Features:
• Veff Serration™
• Flipper Opening
• Black Oxide Blade Finish

Specifications:
• Blade Length: 3.62" (92.00 mm)
• Blade Edge: Veff Serrations™
• Blade Steel: 8Cr13MoV
• Blade Finish: Oxide
• Blade Thickness: 0.13" (3.23 mm)
• Overall Length: 8.19" (207.98 mm)
• Closed Length: 4.55" (115.65 mm)
• Weight: 4.70 oz. (133.24g)
• Handle: Handles - 6061 T6 Al; Inlays - Thermoplastic Rubber (TPR)
• Style: Folding Knife w/Liner Lock

The knife version of a 4x4. Inspired by the aesthetic of the classic crawling vehicle, the CRKT Overland™ outdoor folding knife is crafted to go off road. No matter if your camp kitchen is on a flat rock miles from anywhere or a picnic bench in the park, this knife is perfectly suited for slicing the campfire-charred sirloin.

Designer TJ Schwarz has built himself a reputation on his knife designs that channel the soul of classic cars. From his shop in Boise, Idaho, TJ is at it again with the Overland™ that looks like it’s perpetually about to shift into 4 low. The high-carbon, stainless steel blade features a stonewash finish for corrosion resistance so it’ll withstand camp chef grime for meals on end. With a long, smooth sheepsfoot blade and an elevated G10 and stainless steel handle, it’s perfectly crafted for preparing the main course with all the accoutrements. A simple locking liner is easy to clean and keeps the blade securely in place.

Bring along the knife that will always keep you locked in.

Specifications:
• Blade Length: 3.00" (76.12 mm)
• Blade Edge: Plain
• Blade Steel: 8Cr13MoV
• Blade Finish: Stonewash
• Blade Thickness: 0.12" (3.07 mm)
• Overall Length: 7.38" (187.33 mm)
• Closed Length: 4.36" (110.67 mm)
• Weight: 3.60 oz. (102.06 g)
• Handle: Front - G10; back - 2Cr13 SS
• Style: Folding Knife w/Frame Lock

CRKT Minimalist Persian Fixed Knife

A time-honored design built for today.

Honoring an iconic 17th century Persian blade, the Minimalist® Persian features a long curvature design with minimalist grip for absolute precision and control. Put to use outdoors or for fine detailing, this fixed blade knife wields the impressive rigor of a scalpel—gliding and cutting wherever you decide it lands.

Features:

• Easy To Sharpen: High carbon stainless steel blade takes an edge well
• Minimizes Reflectivity: Bead blast finish reduces reflection
• Strong and Visual: Resin infused fiber handle combines strength with visual appeal
• Gear Compatible: Durable thermoplastic sheath with mounting options
• Compact Utility: Lightweight and easy to carry

Specifications:

• Blade Length: 2.76" (70.15 mm)
• Blade Edge: Plain
• Blade Steel: 8Cr13MoV
• Blade Finish: Bead Blast
• Blade Thickness: 0.13" (3.25 mm)
• Overall Length: 5.81" (147.65 mm)
• Weight: 2.00 oz. (56.70 g)
• Handle: Resin Infused Fiber
• Style: Fixed: Blade Knife w/Sheath
• Sheath Material: Thermoplastic
• Sheath Weight: 1.10 oz. (31.18g)

Your basic outdoor utility knife. If you’re a badass Gurkha warrior. Designer Ryan Johnson of RMJ Tactical is no stranger to archaeologically-significant edged tools; his parents gifted him an antique Kukri knife when he was just ten years old. He’s been refining his aesthetic taste and design skill ever since. The culmination of his passion and hard work: The KUK™. Over the top? That’s just how we like it.

Designer Ryan Johnson hails from Chattanooga, Tennessee, and hasn’t just dedicated his impressive career to producing incredible knives, but to studying the historical and cultural significance behind them. The KUK™ fixed blade is a reflection of this lifelong fascination—it harkens back to just what exactly enticed him to knifemaking in the first place.

Named KUK™, short for kukri, after the Nepalese tactical and utilitarian machete, this full tang recurved blade means business. One look at the burly carbon steel blade with a black powder coated finish is proof. Balanced out by a tough glass-reinforced nylon handle, it’s a surprisingly elegant balance of form and function. And when tucked in its woven polyester sheath, the additional paracord makes for super versatile carry options, just in case you’re headed over a high Himalayan pass with a full pack.

There’s not much that would make a Nepalese warrior jealous, but the KUK™ is another story.

Specifications:

• Blade Length: 10.563" (268.3 mm)
• Blade Edge: Plain
• Blade Steel: 65Mn Carbon Steel
• Blade Finish: Powder Coat
• Blade Thickness: 0.139" (3.53 mm)
• Overall Length: 15.875" (403.23 mm)
• Weight: 14.7 oz. (416.74g)
• Handle: Core - Polypropylene; Overmold - Thermoplastic Rubber
• Style: Fixed Blade Knife w/Sheath
• Sheath Material: 1680D Woven Polyester; Black; Insert - Polyethylene; Black

The service men and women of the coalition forces in the Middle East and Afghanistan require cutting tools that can stand up to the harsh demands of the desert. CRKT's Carson Desert Tactical Folders have been developed specifically to blend into the desert environment.

M16®-14D Desert Big Dog has an aluminum frame M16 in desert camo. The contoured handles of 6061 T6 aluminum are hard anodized Desert Tan. The 3.875" (98 mm) AUS 8 stainless steel blade, chosen for edge retention and durability, receives a highly corrosion-resistant Desert Tan non-reflective titanium nitride coating. It has a Combined Razor-Sharp and Triple-Point™ Serrated edge to cut through nets, webbing and vegetation quickly.

It also features CRKT's automated liner safety. Automated liner safety is the locking liner safety innovation taken to the next level. The automated liner safety sets a pin between the locking liner and the frame. This pin acts as an additional layer of safety, so the locking liner is less likely to disengage during use.

To close the knife, pull the red buttoned safety lever back, slide the locking liner over, and fold the blade into the closed position. Want one of the most secure safety systems on the market? The choice is automatic.

One-hand opening and closing is quick and smooth, the result of precision tolerances and lubrous washers at the blade pivot. The dual ambidextrous thumb studs with checkered surfaces provide instant access in any circumstance. Please note: These knives are not designed for tip-up in-pocket carry.

Features:
• Automated Liner Safety
• Triple Point™ Serrations
• Aluminum Handles w/Carson Flipper

Specifications:
• Blade Length: 3.99" (101.35 mm)
• Blade Edge: Triple Point Serrations™
• Blade Steel: AUS 8
• Blade Finish: Titanium Nitride
• Blade Thickness: 0.14" (3.56 mm)
• Overall Length: 9.25" (234.95 mm)
• Closed Length: 5.38" (136.53 mm)
• Weight: 5.30 oz. (150.25g)
• Handle: Aluminum
• Style: Folding Knife w/Liner Lock

CRKT CEO Flipper Folding Knife

A knife that’s dressed for success.

Discreetly compact enough to stow in your shirt pocket, the CEO folding knife is as sophisticated as it is functional. Designed with a supremely low profile, the CEO cuts no corners on usability and ergonomics, fully embodying the working spirit of everyday carry.

Features:

• Smooth Opening: IKBS™ ball bearing pivot deploys the blade smooth
• Easy To Sharpen: High carbon stainless steel blade takes an edge well
• Fast Opening: Flipper deploys the blade fast
• Strong And Lightweight: Glass-reinforced nylon handle is durable and lightweight
• Easy Closing: Liner lock can be easily closed with one hand
• Carry Options: Adjustable clip for left or right hand carry

Specifications:

• Blade Length: 3.35" (85.14 mm)
• Blade Edge: Plain
• Blade Steel: AUS 8
• Blade Finish: Satin
• Blade Thickness: 0.09" (2.29 mm)
• Overall Length: 7.69" (195.28 mm)
• Closed Length: 4.35" (110.39 mm)
• Handle: Glass-Reinforced Nylon
• Style: Folding Knife w/Liner Lock

With a generous sized blade, comfortable handle and reinforced nylon sheath, this is the survival parang to use when you are your own rescue party.

The Halfachance™ is a beefy fixed blade survival parang designed by award-winning custom knifemaker Ken Onion of Kaneohe, HI to be tough, strong and work like an ox. A thick, carbon steel blade has a black powder coat that is durable in extreme environments. Built for hard use, it easily takes an edge in the field after you’ve finished cutting yourself out of the depths of the jungle.

Half the battle in any survival situation is with your own physical exhaustion. To combat that, the double injection molded handle is ergonomically designed to reduce hand fatigue and features multiple lanyard holes for varied grip options. The result is more efficient slicing action when you need to cut your own path. Literally.

This parang includes a reinforced nylon sheath with a unique velcro belt loop system that can be changed between two positions: dangling or snug against the belt. An extra paracord fob comes laced onto the sheath for emergencies or lashing this parang to a pack, truck, or pack mule.

Reach for the blade that brings you home safely—even when you have only Halfachance™ of survival.

SPECIFICATIONS
Blade Length: 14" (355.6 mm)
Blade Edge: Plain
Blade Steel: 65Mn Carbon Steel
Blade Finish: Powder Coat
Blade Thickness: 0.1" (2.54 mm)
Overall Length: 19.5" (495.3 mm)
Weight: 6.1 oz. (172.93g)
Handle: PP Core & TPR Overmold w/Textured Grip
Style: Fixed Blade Knife w/Sheath
Sheath Material: Weaved Polyester
Sheath Weight: 6.1 oz. (172.93g)

There are knives you see on survival shows. Then there’s the real deal. With a generous sized blade, comfortable handle and reinforced nylon sheath this is the survival machete to use when the only thing you’ll be cutting to is your destination.

The Chanceinhell™ is a beefy fixed blade survival machete designed by award-winning custom knife-maker Ken Onion of Kaneohe, HI to be tough, strong, and work like an ox. A thick, carbon steel blade has a black powder coat that is durable in extreme environments. Built for hard use, it’s easy to sharpen after you've put the finishing touches on your handmade hotel in the woods.

Half the battle in any survival situation is with your own physical exhaustion. To combat that, the double injection molded handle is ergonomically designed to reduce hand fatigue and features multiple lanyard holes for varied grip options. The result is more efficient cutting action that’ll make thick brush R.I.P.

This machete includes a reinforced nylon sheath with a unique velcro belt loop system that can be changed between two positions: dangling or snug against the belt. An extra paracord fob comes laced onto the sheath for emergencies or lashing this machete to a pack, truck, or pack mule.

The Chanceinhell™ is the knife to grab for ensuring your own survival or that of a few Hollywood actors who are in over their heads.

SPECIFICATIONS
Blade Length: 12" (304.8 mm)
Blade Edge: Plain
Blade Steel: 65Mn Carbon Steel
Blade Finish: Powder Coat
Blade Thickness: 0.1" (2.54 mm)
Overall Length: 17.88" (454.15 mm)
Weight: 1.25 lb (0.57 kg)
Handle: PP Core & TPR Overmold w/Textured Grip
Style: Fixed Blade Knife w/Sheath
Sheath Material: Nylon
Sheath Weight: 6.1 oz. (172.93g)

Are you a brute and your untamed chopping power broke your CRKT® Freyr Axe handle? No problem. We have the replacement handle. It's made in the USA and sealed with a lacquer coat that adds durability when you're in the backcountry.

• Tennessee Hickory Handle

Are you a brute and your untamed chopping power broke your CRKT® Berserker™ handle? No problem. We have the replacement handle for your CRKT® T-hawk right here. This Tennessee hickory handle is the replacement handle for the Beserker™, Woods Chogan™ T-Hawk, Woods Nobo™ T-Hawk and the Woods Kangee™ T-hawk. It's made in the USA, twice burned and buffed to add grip when you're in the backcountry.

To replace the handle, remove the old handle by carefully placing the butt of the old handle on the ground and tapping the head of the T-Hawk with a mallet until it slides down. To put the new handle on, slide the head onto the handle from the tapered end until it is seated on the thicker end of the handle. Next, hold the handle of the T-Hawk with the head down and hit the ground or a hard surface sharply several times to seat the head onto the handle. Changes in humidity may cause the head to become loose so be sure to check before use.

Specifications:
• Weight: 9.60 oz. (272.16 g)
• Handle: Tennessee Hickory
• Style: Accessory

A grunty, fast-charging rechargeable headlamp that is simple to operate. It can be activated with a wave of your hand, summoning the power of 440 lumens and a max beam distance of 100 meters!

The Klarus HM1 headlamp is a smart motion sensing rechargeable lightweight LED headlamp. It has a highest light output of 440 lumens with a peak beam distance of 100 meters. Easy user interface with large switch design and a second button for smart sensing mode. The sensor has range up to 15 cm and can be controlled with a wave of your hand. Lightweight rechargeable camping, running and outdoor high output headlamp. Motion sensing lightweight rechargeable LED headlamp!

Features:
• Output of 440 lumens with 100 metres of beam distance
• Built-in rechargeable 1800mah battery pack
• IPX6 waterproof rated
• Smart-Sensor: Equipped with motion sensor, control with waving hand. Sensor range is 15cm
• USB fast charging function: It takes one of hour to charge.
• Battery capacity indicator: Blue, 30%-100%; Red: 5%-30%; Red flashing ≤5%
• Tiltable Feature: 0-60° angle adjustment
• Interface: Large and flat buttons for easy activation and mode switch

Specifications:
• LED : CREE XPG-3
• Runs On: Built-in 1800 mAh Li-ion Battery Pack 
• Peak Beam Distance: 100 metres
• Peak Beam Intensity: 2500

Brightness Outputs:
• Turbo: 440 Lumens - 2.5 hours
• High (Spot): 330 Lumens - 2.7 Hours
• High (Flood): 120 Lumens - 7.7 Hours
• Medium : 100 Lumens - 2.5 Hours
• Low: 10 Lumens - 70 Hours
• IPX Rating: IPX-6
• Impact Resistance: 2 Metres

Dimensions:
• Length - 60 mm
• Head Diameter - 43 mm
• Body Diameter - 41 mm
• Weight: 70 g (Including Battery)

Included:
• 1 x Klarus HM1 Headlamp
• 1 x Headband
• 1 x Micro-USB Cable
• User Manual

A Trek insole for enhanced comfort and support.
When walking, you want your feet to feel comfort and support and this is exactly why you need our G20 insole.

This insole is built around a lightweight low-volume dual-density EVA foam footbed, which absorbs and disperses shocks, rather than allowing your feet to take the impact. This, paired with the added benefits of a contoured arch support and a deep heel well, ensures enhanced stability. Then, add the Coolmax® DermoDry® top sheet, which wicks away and manages moisture and your feet will never want to stop moving.

Directions for use:

• Remove any existing insole.
• Replace with the correct G20 for your size.
• Depending on how your boots currently fit, you may need to choose a smaller or larger size.

*Top tip* To ensure these insoles stay extra fresh after long hikes, spray with Odour Eliminator.
 
Features:

• Absorbs and disperses shocks.
• Contoured arch support.
• Deep heel well.
• Coolmax® DermoDry top sheet.
• Breathable.
• Durable.

A Memory+ insole that adds comfort and support to all footwear.  The most important thing on any walk is comfort and that is what our G10 insole is there to do – keep your feet comfy so you want to keep them moving.

These insoles have a 5mm memory foam mid-layer which ensures immediate and long-lasting comfort.

You’ll also find a moisture-wicking Coolmax® DermoDry top sheet and felt base, which not only aid moisture management but also add durability and increase stability.

So, make sure you buy your boots this new accessory today, so that your feet continue to stay your friend.

Features:

• Memory foam for added comfort and shock protection.
• Coolmax® DermoDry top sheet.
• Breathable.
• Durable.

How to Use: 

• Remove any existing insole
• Replace with the correct G10 for your size.
• Depending on how your boots currently fit, you may need to choose a smaller or larger size

*Top tip* To ensure these insoles stay extra fresh after long hikes, spray with Odour Eliminator.

A remote switch is an add-on you won't regret having for a firearm mounted light. Have the switch where you want it, not where it has to be! 

The Olight SROD remote switch has two options, a high power button and a low power button for your choice of Illumination with one easy press. The switch magnetizes to the back of the torch as well as having a push-to-lock mechanism. Both of these systems securely attach the remote to your torch without the need for screws or other permanent options. It is also just as easy to detach from the torch! 

SROD Long Coil Wire Magnetic Remote Switch suitable for Javelot Pro 2, Warrior X 3 and Warrior 3