The Night Saber High Capacity Spotlight Battery is the perfect power solution when you are on the go. Its 9,000mAh capacity means it can be used to power your spotlight for those night time hunting trips, recharge your mobile phone, tablet, or GPS when you don't have access to Mains power. Or even jump start any gasoline engine that is fitted with a 12-volt battery! It even features a LED flashlight with three different modes of operation.
When tested using the Night Saber 36W 3500-lumen spotlight, the battery lasted 1 hour before going dim.
Features of the High Capacity Spotlight Battery include:
Emergency Start
Jumpstart gasoline engines in vehicle, motorcycle, boat or jetski with a 12-volt battery. USB Charging Port
Charge your cell phone, tablet, GPS or 2-way radio. Car Charging Port
Charge your battery pack during your commute. Spotlight Adapter
Run your favourite spotlight on the go! Built-in LED Flashlight
3 modes - illumination, strobe, and S.O.S. Battery Protection
From over-charging and over-discharging Automatic Power On / Off
When not it use.
Specifications:
Capacity: 9,000mAh
Input: 14V/1A, 5V/1A
Output: 5V/2A and 12V jump start
Charging Time: Approx. 3 hours hours
Start Current: 200A
Peak Current: 400A
Size: 130mm (L) x 68mm (W) x 24mm (D)
Weight: 282g
Operation Temp: -20 °C ~ 60 °C
Lifetime: >1000 cycles
Package includes:
1x Power Bank
1x Set of plug-in alligator jumper clamps
1x 3-in-1 USB Combo Cable (Mini USB, Micro USB, & Apple plugs)
1x 12-volt Car Charger for charging from a vehicles cigarette port
1x 12-volt accessory plug.
*some apple products may not charge, we recommend using your genuine apple charging cable
A spare battery for your Javelot Turbo torch. It includes a tail cap so that it can be charged off the torch with the charge lead included with your Javelot Turbo. Charge your spare on the go via USB MCC cable included with every Javelot Turbo.
Specifications: • Capacity: 10000mAh 3.6V/36Wh • Size (LxD): 178 x 30mm • Weight: 224.5g / 7.92oz • Warranty: 2 years
The Night Saber Wiring Loom is the solution to all your wiring needs for Night Saber 12V Light Bars. With all the fittings included the most difficult thing in your installation will now be facing your brand new light bar down to the vehicle.
Features: - Suitable for twin and single light sets - High quality cable and connectors - Pre-wired, ready to install - Easy to understand design - Off/on switch included - Relay & inline fuse holders with fuse installed - Suitable for passenger vehicles and 4x4's - Option of universal or H4 connectors for high beam active
Accessorize your rifle with the Precision Pro M-Lok Torch Mount with Rail.
This torch mount allows you to mount any torch that has a body tube width of 1", 27mm or 30mm to your M-lok rail. This M-lok torch mount kit also has the M-lok rail separate so you can alternatively mount any weaver/picatinny style optic or laser accessory.
Features:
5 Slot weaver rail
Comes with allen wrenches for easy installation
Strong & durable anodized alloy
Includes shims to fit 1", 27mm, & 30mm tubes
Fits to any M-lok stock
Ideal for use on:
Hammerli Tac R1 with M-Lok
Tippmann M4-22 Elite with M-Lok
H&K 416 with M-Lok
Smith & Wesson M&P 15-22 with M-Lok
Ruger Precision with M-Lok
Tikka T3X Tac A1 with M-Lok
MDT chassis with M-Lok.
Featured in the images is the Led Lenser P7 Core torch
The Outdoor Outfitters Quick-Detach Torch Scope Mount for LED Lenser. After getting frustrated with the lack of mounting options for the most popular LED Lenser Torches we have come up with a fantastic easy to use mount.
The black anodized aluminium finish matches the torch and any standard black scope’s finish.
Simply mount the included scope ring onto any 1" or 30mm scope tube. Then fit the torch mount's weaver base to the scope ring.
These are easy to install and mean you can easily remove your torch for the times when you don't need it shooting.
The torch mount is 40mm in diameter
Includes: • 40mm Quick-Detach Scope ring • 1" Inserts for Scope ring • Torch Mount to fit M14, M14X, P17, P17.2, X14, X21, X21.2, X21R, X21.2R, COASTHP17, COASTHP21 or any 40mm torch body • Allen Keys to fit
5.5m vehicle battery extension cord from Night Saber features alligator clips on one end and a female cigarette adaptor on the other end.
Specifications: • Extension cord with positive and negative battery clamps at one end, accessory adaptor at the other • Works with any item that plugs into a standard vehicle accessory socket • 5.5 metres long
Free your hunting hand with the Night Saber Torch Scope Mount for LED Lenser, Night Saber and Olight torches.
Night Saber have come up with a fantastic, easy to use mount so you can hunt and spot with more ease and practically while on the move.
The scope mount and the torch mount both have inserts so you can have either ring on a 1" (25mm) or 30mm tube. Simply mount the included scope ring with a rail mount onto any 1" or 30mm scope tube. The fit the quick detach torch ring with the fastened torch onto the rail. These are very easy to install and means you can easily remove your torch for the times when you don't need it when shooting. The black anodized aluminium finish matches your torch and any standard black scope’s finish.
Includes: • Quick-detach mounts for scope and torch • 1" Inserts for scope and torch ring • Height extension mount for torches with large lens diameters • Allen keys.
Compatible with popular torches such as the Olight Javelot Pro, Olight Warrior, LED Lenser P7, Night Saber Blitzer
Fab Defense is one of the worlds leading manufacturers in high quality tactical accessories. Features:
Designed to hold torches with 1 1/8" diamter Design to hold flashlights or laser devices A Secure bolt locking system for the mounted device Fits picatinny rails Quick release mechanism Tough rigid and lightweight reinforced polymer design Special shape for easy turn-on device Modified to fit pistol, gun, or rifle.
The perfect companion for your Night Saber rifle mounted Strike torch. This allows you full control right where you want it. The coiled cord stretches from 31cm up to 60cm. The waterproof rubberized switch has multiple buttons for ease of reach. The buttons will turn the unit ON/OFF or 2 fast clicks for strobe.
Simply unscrew the end cap from your Night Saber Strike torch and replace it with the remote switch upgrade.