Night Saber L5 Hunter Green Laser Sight

The Lock-N-Load Classic™ is the only single-stage press to feature quick-change dies. If you reload more than one caliber and want the ease and simplicity of a single-stage press, you want Hornady’s Lock-N-Load Classic. The Lock-N-Load Bushings make changing calibers with a single-stage press faster and easier than ever before. Switch from one die to another with just a quick twist, no screwing and unscrewing dies or die adjustments are needed. With the Lock-N-Load Classic, you’ll load more shells in less time than ever before.

Note: The auto primer feed shown in photo is optional, and is sold separately.

FOUR WAYS LOCK-N-LOAD™ CLASSIC CAN IMPROVE YOUR RELOADING:

1) SPEED
Lock-N-Load™ Technology lets you switch dies to a new caliber and begin reloading again in seconds. Automatic priming is hands-off and trouble free. The angled frame gives you easier access to your cartridges.

2) CONSISTENCY
Lock-N-Load Bushings let you adjust your dies once, then lock the setting into place, for consistent reloads every time.

3) PRECISION
The CNC machined die and ram openings create near perfect alignment of the ram and die, so cases are lined up properly with the dies at all times. This precision translates into greater accuracy. The strong, rigid frame also provides the stability necessary for precision reloading.

4) VERSATILITY
With Lock-N-Load, one press can handle multiple calibers with ease. There’s no need to purchase multiple presses so you can leave your dies in place. Your dies will remain exactly as you set them, within their Lock-N-Load Die Bushings.

The Hornady Lock-N-Load Classic Reloading Kit comes with everything you need to turn out high-quality, accurate handloads. You get everything listed here, plus complete instructions. The Hornady Handbook of Cartridge Reloading is especially valuable, with hundreds of rifle and pistol loads for every shooting application.

A single stage press is perfect for both beginners and those who want complete control over the entire process. The Hornady Lock-N-Load Classic Loader delivers both dependability and precision with its uniquely angled, solid cast frame that offers greater visibility and easier access to the cartridge. Designed to assure perfect die and shell holder alignment, its Lock-N-Load quick change bushing system also makes the process quick and easy.

Features:
• Lock-N-Load quick change bushing system - Lock-N-Load bushings not only let you switch from one die to another in a matter of seconds, they also offer the quickest and easiest die setup on the market. Just set the die and tighten the Sure-Loc ring on to the Lock-N-Load® bushing. Quickly remove and re-install without the need to readjust the die or keep a separate seater die for each of your pet loads.

• Power-Pac linkage and solid steel arms - arms rotate on steel pins that run completely through the cast frame. The Power-Pac linkage design multiplies the leverage you apply to the handle, making it easier to size cases and reduces user fatigue.

• Positive priming system (PPS) - once the spent primer ejects at the top of the stroke, you can add a new primer to the PPS and it self-aligns to feed and insert the primer at the bottom of the stroke where leverage is best. Our self-aligning primer arm also allows for easy manual inserting of primers without having to raise the handle. All the work is done at the bottom of the stroke. Works easier than ram prime units and much better than old style primer arms. Small and large punch included.

• Strong angled frame - this high strength alloy frame offers the rigidity and stability needed for precision reloading, and is guaranteed never to break or fail. The frame's unique angle gives the reloader greater visibility and easier access to the cartridge in the press.

• Easy grip handle - a large, ball-style grip reduces fatigue and the long handle increases leverage and reduces effort.

Accutech ultrasonic cleaner 3.2 litre. Microscopically cleans metal finishes without the use of harsh chemicals and scrubbing! Ultrasonic cleaning reaches internal surfaces that regular cleaning can't! Cleans empty brass, metal parts such as gun parts and silencers, hardware, watches and jewelry, glasses, tools, precision medical instruments, kitchen utensils and more.

How does a sonic cleaner work?
A sonic cleaner uses ultrasonic energy (40 kHz) in the form of sound waves to create millions of tiny microscopic bubbles in the added cleaning cleaning solution that can work their way into holes and hidden cavities, loosening dirt on all surfaces that the solution touches. This action is called cavitation, and it occurs thousands of times per second to gently yet thoroughly scrub contamination off desired articles to clean.

This cleaner is designed to be used with water paired with a solution such as Hornady's One Shot sonic solution.

Features:
• Stainless steel construction
• Seamless 1.1mm SUS304 stainless tank
• Digital control - auto time and temp
• Time & temperature display
• Removeable wire basket
• Insulated built in carry handles

Specifications:
• Ultrasonic frequency: 40kHz
• Ultrasonic output: 120W
• Temperature range: 20 to 80C
• Auto time range: 1 - 30 minutes
• Heating power: 100W
• Tank dimensions: 24 x 13.5 x 10 cm
• Tank capacity: 3.2 litres

Green laser sight with rail mount and pressure switch. A green laser over a red laser is more optimized towards the hunter. A strong green laser will stand out more even in the day giving you more flexibility and the tactical advantage for fast shots from the shoulder or hip.  Mounts to a picatinny or weaver rail so you can easily attach it to your rifle or shotgun!

Includes:
Laser Sight
Rifle Mount
Remote Pressure Switch
Wrist Strap

Specifications:
Laser Output: <5mw
Wavelength: 532nm
Battery Type: 2x 3v CR123A Lithium
Battery Life: 13hrs continuous
Weight: 150g

The Hornady Cam-Lock Case Trimmer features a micro-adjustable cutter that allows for a change in length in increments of 1/1000" without moving the case. The one finger case cam lock secures the case in place with just a touch, another touch is all that is needed to release the case. All trim lengths are measured from the head of the cartridge. Large diameter, replaceable cutting head trims cases up to .50 calibre in diameter with a tall frame to prevent banging knuckles on the bench.

Features:
• Base Length: 8" x 2-1/2" (L x W)
• Mounting Location: 4-holes (No mounting hardware included)
• Collets Used: No, uses shell holders to hold the case
• Pilots Used: Hornady
• Pilots Included: .22 Calibre, 6mm, .270 Calibre, 7mm, .30 Calibre, .38 Calibre, and .45 Calibre
• Made in the USA.

Notes: Will not work with Hornady Shellholder #37 (5.7x28mm FN, .25 ACP)

The Lock-N-Load Powder Measure is the only system that uses a full size powder measure that can be reset to another charge or powder with the push of a button.

The unique inserts in the measure can be preset to the charge you use with the caliber you are loading. Push a button, change inserts and powder and you’re ready to go. Inserts can be adjusted for almost any charge. T

The most flexible (and economical) powder system available for progressive presses. (With optional powder die you never have to readjust for a caliber conversion. It switches instantly.)

Features
• Smooth Delivery with All Types of Propellant
• Push of a Button to Swap Metering Inserts (some sold separately)
• Large Charge Range from 5 grains to 265 grains
• Multiple Mounting Options – Comes with Bracket to bench mount

Wheeler’s Digital F.A.T. Wrench (Firearm Accurizing Torque) brings even more precise torque settings to the handheld torque wrench market. This amazing digital handheld torque wrench lets you apply repeatable, accurate torque settings to your scope rings, bows and other screws. The audible and visual indicators let the user know exactly when the desired torque setting has been achieved. The large range of 15-100 in/lbs. will aid in accuracy of all your screws and decreases the opportunity for problems in the field. The FAT Wrench Bits are built to last and are made from S2 tool steel and hardened to 56-56 Rockwell “C”.

Features:
• Bits are made from S2 tool steel and hardened to 56-56 rockwell 'C'
• Ergonomic over molded design
• Large LCD digital for ease of viewing 
• Audible indicator tone
• Full set of bits included

he Hornady M-2 Case Tumbler is the ideal tool for reloaders looking to remove abrasive foreign particles that can scratch the inside of reloading dies. Case tumblers clean and polish brass to a brilliant finish before loading. Your press and dies will operate more smoothly and your finished reloads will look like new, using the M-2 Tumbler.

Technical Information:
- Voltage:220 Volt (European Usage Only)
- Bowl Capacity: Up to 500-38 Special Cases
- Media Included: No
- Material: Bowl is plastic
- Note: Tumblers are not designed for tumbling loaded ammunition

Wheeler’s F.A.T. Wrench® (Firearm Accurizing Torque) brings perfect consistency to every screw on your rifle! This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws, and other screws, which aids in accuracy and decreases the opportunity for problems in the field. The FAT Wrench is a perfect compliment to the Deluxe Gunsmithing Screwdriver Sets. Together, they can ensure accurate tightening of most every screw on any gun in your collection.

Features:
• Bits are made from S2 tool steel and hardened to 56-56 rockwell 'C'
• Torque adjustment range from 10"lbs to 65"/lbs
• Accuracy +/- 2"/lbs up to 40"/lbs; 40-65 is +/- 5%
• Convenient storage case included

This Lyman E-Zee Hand Priming Tool system works with any popular brand of standard shell holder and allows instant changeover between primer sizes. Includes two primer trays, each of which incorporate their own built-in large or small primer punch assembly. There are no small parts to fuss with or lose. Each tray has a built-in shut-off gate to keep primers in place during change-over. The reloader simply removes the snap-in-place lock collar and installs the correct size primer tray and the shell holder as needed. Then, the lock collar is snapped in place and the change-over is complete. The primer trays also function as a primer flipper to properly orient primers for seating. The comfortable ergonomic design optimizes leverage to reduce hand fatigue.

Feature
- Ergonomic shape reduces fatigue
- Accepts standard shell holders
- Includes large & small primer tray/parts assemblies

Whether you're a novice or a seasoned hand loader, this book will provide everything needed to successfully reload your favourite cartridges!

The Hornady 11th Edition Handbook of Cartridge Reloading includes the latest Hornady bullets, along with new cartridges, powders and more. It is filled with handloading techniques, bullet information and reloading data – it’s a one-stop shop for support of Hornady component bullets.

New cartridges include the latest efficient and accurate Hornady developments like the 6mm ARC, match-winning 6mm Creedmoor and high-powered 6.5 PRC and 300 PRC.

Features:

• Over 1,000 pages of reloading data, techniques and bullet information
• 200+ different calibers featuring a variety of loads using Hornady® bullets
• An impressive lineup of new and expanded data that incorporates new powders, new bullets like the A-Tip® Match and new additions in the ELD-X, ELD Match, GMX, FTX, Sub-X and more
•  New cartridge additions like the 6mm ARC, 6.5 PRC, 300 PRC, 224 Valkyrie, 350 Legend and 28 Nosler
• Well over 1,500 load combinations were shot to update and expand the reloading pages in this edition

Hornady® reloading dies represent the finest in machined craftsmanship. Precise machining allows accurate reloading by offering easier adjustments, better alignment and smooth functioning.

With one of the finest internal finishes in the industry, Hornady® Custom Grade and Match Grade Dies provide a lifetime of reloading. They’re so well crafted that they’re guaranteed never to break or wear out from normal use.

All dies include the popular double-flat Hornady die lock rings installed and a custom plastic box. Hornady dies are grouped in three series for pricing - die construction and quality is equal in each series. The Custom Grade Full Length Sets include one each of the Custom Grade Full Length Dies and Seater Dies. Dies are complete with Zip Spindle decap assembly and double-flat lock rings, packaged in a custom plastic die box.

Calibre: 300 Blackout