Firearm Accessories - Ammo Holders

Butt Stock 9 Round Cartage Holder

These Butt Stock Shell Holders feature an elastic loop that fits around the butt of your rifle, providing easy access to 9 rounds of ammunition.

This only requires being pulled over your butt stock where it will remain secure and allows you to carry 9 rounds that can be used to quickly reload your firearm.

Specifications:
- Holds 9 rifle cartridges.
- Quick Access to Cartridges
- Elastic Loops Hold Cartridges Securely
- Colour: Black

* Rifle not included and ammunition not included 

Carries 100 rounds of .223 / .204 / .222 ammunition, perfect for reloaders. Stackable with easy-grip, scuff-resistant textured surface.

Dimensions;
Length 12cm
Width 12cm
Height 7cm

Suitable for; 17 Fireball, 17 / 221 / 222 / 223 Rem., 204 Ruger, 218Bee, 22 Hornet, 222 Rem. Mag., 223 Rem. HP, 25-20Win., 300 Sherwood, 300 Wisper, 32Ideal, 32/ 401 Win. S.L., 351WSL, 38-55 Win., 6x47, 6mm TCU, 6mm-223 Rem

(110907)

Outdoor Outfitters Locking Hardware Kit For Ammo Boxes - Make any ammo box lockable 

What's included: 

• 1/2" Solid Stainless Steel Stud
• Large Washer
• Small Washer
• Rubber Washer
• Grade 8 Nylon Locknut
• Max shackle diameter: 5.5 mm 

PLEASE NOTE: A power drill and 8mm bit may be required for installation on some Ammunition Tins without pre-drilled holes

Instructions: 

1. Close lid. Find centre of the latch hole (or slot) and mark the tin at that point. Be as accurate as possible. 
2. (TIP: on .50cal tins with a small latch hole, close the lid and use a 12mm or 1/2" drill bit to lightly mark the centre (Do not drill through).) 
3. Drill an 8mm hole at the centre mark. Drilling a small pilot hole first may make this easier. 
4. Insert the threaded part of the locker stud through the hole from outside to inside. 
5. On the inside of the tin put the neoprene washer over the threads, followed by the small washer, then the nylon lock nut. Snug it tight with a wrench. Do not hold the stud with your fingers as it may have sharp edges. No thread locking compound is required but you may use some if you desire. 
6. With a 'big hole' or slotted lid, slip the supplied large washer over padlock stud before installing lock 
7. 6. For tins with 'small hole' latches, some filing or dremeling of the latch hole may be required to allow it to slip over the padlock stud. The closer to centre your initial hole is drilled, the better it will fit.

MTM Flip-Top Ammo Boxes are a great way to protect ammunition from moisture and dust. They feature a textured surface and stackable design. The included label is idea for recording custom load data.

Sizing accommodates below cartridges:

260 Rem., 6.5-08 A-Square, 257 / 270 / 300 / 338-378 / 340 / 375 / 7mm Wby. Mag., 264 / 300 / 330 / 338 / 458 Win. Mag., 300 / 375 H&H Mag., 300 / 338 / 375 / 7mm / Rem. Ultra Mag., 30 Super Flanged, 300 / 330 / 375 / 416 Dakota, 303 Brit., 308 / 358 Norma Mag., 358 STA, 25-284 / 38-72 / 405 Win., 400 / 400-350 Nitro Exp, 400-360 Thin Rim Purdey, 404 Jeffery, 40-65 Sharps Str., 444 Marlin, 375 Ruger, 6.5-284 Norma, 6.53 Scramjet, 6.5x52 Ital., 6.5x57 Rimmed, 7.21 Firebird, 7mm Rigby, 7x61 S&H, 416 / 6.5 / 7mm / 8mm Rem. Mag., 416 Taylor, 458 Lott, 6.17 Spitfire, 7mm STW, 7.5x 54 Swiss, 7.62x54R, 8x64 Brenneke, 8x65 Rimmed, 8x68S Mag., 9.3x74 9.3x82 Rimmed, 9.5x57, 10.75x68 Mauser.

Bullet Down: 280 Flanged Nitro Express, 378 Wby. Mag., 338 Lapua Mag., 416 Rigby, 500 Nitro, 6.5 x 58 Rimmed, 7.82 Warbird, 8.59 Titan.

This is for one Outdoor Outfitters Flip-Top Ammo Box. The pistol ammo boxes hold 100 rounds and the rifle ammo boxes hold 50 rounds.

Perfect for reloaders. Stackable with easy-grip, scuff-resistant textured surface.

Available in the following calibre sizes: Please let us know which calibre size ammo box you would like when purchasing.

Rifle calibre (holds 50 rounds):
- 223/204/222 Cal

MTM Ammo Slip Box 22-250/7.62x39 20 Round

Carries 50 rounds of .270 / .25-06 / .30-06 ammunition, perfect for reloaders. Stackable with easy-grip, scuff-resistant textured surface.

Suitable for: RL-50- 224Clark, 240 Wby.Mag., 257 Roberts, 270 Win., 25-06 / 280 Rem., 30

Gibbs, 30-06 Spr., 318Westley Richards, 338-06 A-Square, 35 Whelen, 375 Rimless 2 1/4 , 6.5Carcano, 6.5x257 Roberts, 6.5-06 A-Square, 6.5x54mm Mann-Schone, 6.5x 55 Swedish, 7x 64 Brenneke, 7x72 Rimmed, 7x57 / 9.3x57mm MAUSER, 8x57J, 7.7 Jap, 7.7x58 Jap., 8mm-06, 9.3x74,

Dimensions:

• Length 35cm
• Width 20cm
• Height 34cm

Carries 50 rounds of .243 / .308 ammunition. Stackable with easy-grip, scuff-resistant textured surface.

Suitable for; 220 Swift, 300 Sav., 338 RCM, 225 / 243/ 307 / 308 Win., 338 Fed., 25 / 32 / 6mm Rem., 28-30 Sevens, 30 Rem. AR, 360 NitroExpress 21/4”, 5.6 x 52 Rimmed, 6.5 Creedmoor, 6.5x50 Jap Arisaka, 6mm-284 Win., 7.35 Carcano, 7.5 x 54 French MAS, 7.65 x 53 Mauser, 7mmTCU, 7mm-08Rem

Dimensions:

• Length 15.5cm
• Width 8cm
• Height 8cm

Perfect ammo carrier for the handgunner who wants to spend several hours at the range. Ideal for storing reloads. Stackable with easy-grip, scuff-resistant textured surface.

Dimensions;

• Length 12cm
• Width 12cm
• Height 3.5cm

Suitable for 9mm, .380ACP ammunition

​​​​​Ammunition used for illustrative purposes and is not included 

MTM Ammo 20 Round Slip Box for 243-30-06

MTM ammunition cases are a favourite of rifle enthusiasts throughout the world. They are made of virtually indestructible polypropylene that will not warp, crack, chip, peel, expand or contract.