All Products

The HiViz Light Pipe Fiber Optic Front Sight will put you on target faster and more efficiently than your standard stock front site. The bright crystal clear fiber optic dot is easy to acquire under nearly any lighting conditions. The housing is made from durable steel construction with a resin overmold that will last for years. Upgrade the front sight on your Walther pistol with the HiViz Light Pipe Fiber Optic Front Sight.
Please note that the rear sight is not included

Specifications and Features:
HiViz LightPipe SW3004-G
Interchangeable LitePipes
Green Fiber Optic
Size 0.180"
Steel
Black

Fits:
Walther P99, PPQ, PPX and CCP front sight.

Does Not Fit:
Walther PPQ M2 in .22 caliber

The Hi-Viz LITEWAVE Fiber Optic Sight Set will put you on target faster and more efficiently than your standard stock front site. The bright crystal clear fiber optic dot is easy to acquire under nearly any lighting conditions. The housing is made from durable steel construction that will last for years. Upgrade the front sight on your Ruger 10/22 with the Hi Viz LITEWAVE Fiber Optic Sight Set.

Specifications and Features:
HiViz LITEWAVE HRBLW01
Front and rSight
Interchangeable LitePipes
Red, and Green, Fiber Optic
Steel Construction
Black Housing

Fits:
Ruger 10/22 with standard barrel including carbine and take down models.
Does not fit bull barrels

If you have been searching for a way to turn your favorite LiteWave handgun sight set into a low light performance tool then try the simple snap in line of new HIVIZ Luminous LitePipe. Luminous LitePipe combines the same daylight brightness found in traditional HIVIZ sights but now with a new unique proprietary luminous core. This patent pending design offers you amazing levels of brightness when fully charged even in complete darkness. The fast charging technology will keep the sight illuminated for more than 30 minutes with as little as 15 seconds.

Specifications and Features:
HI-VIZ Shooting Systems LLHLR-KIT
Luminous LitePipe Replacement Kit Version 5
Version 5 Long Version
Green Front
Red Rear
Charged by UV or any light source
15 second charge = 30 minutes of brightness or more
Brighter alternative to tritium when fully charged
Perfect for transitional light times
An affordable, innovative alternative to tritium
Interchange Luminous LitePipes with any other HIVIZ interchangeable LitePipes

Fits:
Long Luminous LitePipe Kits fit all HIVIZ LiteWave Handgun Sights
EXCEPT the following which require the Short Luminous LitePipes: Glock Target Sight Set (GLT178), and Sig P-Series Sights (SGLW18, SGLW06 and SGLW08)

This Hi-Viz LITEWAVE Luminous LitePipe Replacement Set will put you back on target immediately with glow in the dark luminous fiber optics. Maybe your sights got damaged during training exercises, maybe you're ready for another colour combination, or maybe you need an inexpensive low light solution. When it comes time to refresh or replace the LitePipes in your LITEWAVE Sight Set, Hi-Viz has you covered. This kit comes with green luminescent light pipes that will maintain their glow for 30 minutes with as little as a 15-second charge. Fully charged they are brighter than Tritium sights! Upgrade your LITEWAVE Sights with the Hi Viz Luminous LitePipe Set.

Specifications:
- Fiber Optic with luminous core
- Affordable alternative to tritium
- 15 second light charge for 30 minutes of brightness
- Brighter than tritium when fully charged

Fits:
- Long LitePipe Kit fits all HiViz LiteWave sights not included in the Short LitePipe Kit
(the Short LitePipe Kit - not included - fits GLT178, SGLW18, SGLW06, and SGLW08)

(275471)

The Hi-Viz LITEWAVE Fiber Optic Sight Set will put you on target faster and more efficiently than your standard stock sites. The bright crystal clear fiber optic dots are easy to acquire under nearly any lighting conditions. The housing is made from durable steel construction that will last for years. Upgrade the front and rear sights on your Henry Rifle with the Hi Viz LITEWAVE Fiber Optic Sight Set.

Specifications and Features:
HiViz LITEWAVE HHVS500
Front and Rear Sight Set
Adjustable Rear Sight
Interchangeable LitePipes
Red, Green, and White Fiber Optic
Steel Construction
Black Housing

Fits:
Henry Models H001TM, H001TV, H003TM, H004M, H004V, H004SM, H004SV, H006C, H012C, H012CR and H010
Does Not Fit Henry Models Not Listed

All HIVIZ sights are built to rigid standards using only the highest quality materials and shooter tested to ensure they'll withstand the test of time. LitePipes are made of a chemical resistant material and injection molded toa chieve maximum brightness and a consistent sight picture.

Bright: Sights are cut away in the center to allow maximum light gathering from any angle while retaining strength.
Interchangable: Includes a variety of LitePipe colors and sizes for any lighting condition.
Precise: Square sight profile for precision rear sight alignment.
Durable: All sight bases are solid steel construction.
Optically Efficient: Recessed LitePipe eliminates halo and reveals a crisp, clear dot.
Holster Friendly: HIVIZ pays strict attention to contouring all handgun sights to be as smooth and snag-free as possible.

HI VIZ Litewave fiber optic rear sights gather and magnify ambient light to produce two glowing dots that are eye-catching and aid in rapid target acquisition. The unique Litewave design lets you quickly change colors quickly. The sight uses .070" diameter litepipes and comes with lightpipes in green, red and black. The litepipes store in the included litepipe changing key.

Features and Specifications:
Manufacturer Number: GLLW15
Fits: All GLOCK models in 9mm, .40 S&W and .357 SIG

HI VIZ Glock Litewave Front Sight

Improved light gathering green fibre optic front sight for Glock.

Generation 3 interchangeable front sight
Diagonal-wave design for increased durability and brightest sight
Skeletonized sight body
Fits all Glock models including 41 and 42

If your eyes just aren't what they used to be, or you have trouble visualizing your front sight, HiViz has the answer for you! Having the right sight makes all the difference between a solid hit and a miss so why not get one that offers a bright sight picture allowing you to have faster target acquisition? HiViz's overmolded pistol sights are suited to the demands placed on duty pistols or rugged competition guns. These sights combine the strength of our durable LightPipes with an incredibly tough resin overmold that protects the sight while allowing light to reach the LitePipe.See the light and get faster on target with the HiViz fiber optic front sight.

Specifications and Features:
Front sight for 1911's
Steel
Interchangeable LitePipes

Truglo fiber optic mounted in plastic holder (1 Piece). Designed to fit Gamo air rifles as a replacement sight.

The BSA Boresighter makes sighting in a gun much easier by aligning a scope's reticle with the barrel, getting you on paper before you even get to the range. It comes with 15 arbors for use with rifles. Works for 177 pellet guns (not for 17 rimfire or centerfire barrels) all the way up to 50 caliber. Includes a protective hard plastic case.

Includes: 15 Arbors in calibers:

BSA Bore Sighter Kit BS-30 has 15 studs for all popular calibers: .177, .22, 6mm/.243,.25, 6.5mm, .270, 7mm, .30, .32, .338, .35, .375, .44, .45, .50.

(Note that the .177 arbor will not fit .172 groove diameter rimfire or centerfire barrels. Examples are the 17 Remington, 17 HMR, 17 HM2. The arbor in this kit will not work in these barrels.)

Comes in a hard protective carry case
Intended for use with rifles only, not with handguns

The 5-25x56 T5Xi scope from Steiner combines fully anti-reflection coated optics, a rugged waterproof body, and an illuminated reticle. The optical system features a 56mm objective for gathering more light in low-light conditions and a 5-25x zoom for medium-to-long range target acquisitions. Another highlight is the Special Competition Reticle (SCR) reticle, which consists of three very thin posts and a fine milling crosshair with an illuminated central area and a truncated top line. The reticle is located in the first focal plane and has densely spaced MIL-based hash marks. To provide clear visibility of the reticle's pattern in various lighting conditions, there are 11 illumination brightness levels: seven for daylight and four for nighttime. To help you compensate for wind and ballistic motion, the scope has 15 MIL windage and 26 MIL elevation adjustment ranges with 0.1 MIL clicks.

The low-profile turrets are resettable and have hard stops at zero positions to prevent going over the range. The adjustment knobs and dials are wide and offer a comfortable non-slip grip. The elevation dial also has a second rotation indicator (with an integrated window) to avoid confusion about where you are on the dial. A tapered eyepiece ring with a zoom factor scale enables an easy verification of your magnification setting while you are aiming, without taking your attention from your target. If you need an instant zoom adjustment, use the included eyepiece throw lever for one-finger operation. To make sure that your personal diopter setting cannot be accidentally bumped off its position, the diopter ring has a locking mechanism. For exceptional strength and durability, the body offers a 34mm single-piece maintube. It is shock resistant, fogproof, and waterproof submersible to 33'.

Steiner scopes manufactured after 2014 feature a transferrable life time warranty (30 years) against performance defects. Outside of these periods a flat rate exchange policy applies. 

Features:
• Anti-reflection coated optics
• 56mm objective gathers more light in low-light conditions
• Anodised aluminum housing
• Tapered zoom ring makes zoom factor verification easy
• Wide, low-profile, knurled dials provide an easy grip
• Resettable and lockable windage and elevation turrets
• Elevation knob has a second rotation indicator with a window
• Throw lever for quick and easy control of zoom is included
• Side focus parallax corrector knob
• Locking diopter ring"
• Fogproof, shock resistant
• Waterproof, submersible to 33' 

Steiner SCR Illuminated Reticle:
• First focal plane
• Designed for special competitions
• Three fine posts
• Fine milling crosshair with an illuminated centre and truncated top
• MIL-based measurements
• Seven brightness levels for use in daylight, four brightness levels for use at night

Specifications:
• Magnification: 5-25x
• Tube Diameter: 34 mm
• 0.1 MIL impact point correction
• 15 MIL windage and 26 MIL elevation adjustments
• Length: 16.6"
• Battery: CR 2450
• Item No. 5122 - MIL

Schmidt & Bender Klassik 4-16x50 riflescope is designed for long range hunting and best choice for varmint hunters. It offers great optical properties and shows all the detail at great distances. Schmidt & Bender Klassik riflescopes are designed for hunters who seek good quality in a traditional construction and do not require an illuminated reticle. They perform well in poor light conditions and dusk or dawn hunting. The reticle is seated in the first focal plane and will change in size according to magnification. All Schmidt & Bender Klassik series riflescopes are waterproof and filled with dry nitrogen for easy use at low temperatures. All lens surfaces are multi coated and the construction ensures safe use on even the most powerful hunting rifles. Schmidt & Bender Klassik riflescopes have a warranty period of 10 years and an additional 20 years guarantee for service and maintenance.

Specifications
Manufacturer Schmidt & Bender
Riflescopes series Schmidt & Bender Classic
Variable magnification Yes
Minimal magnification 4x
Maximal magnification 16x
Lens diameter 50 mm
Max. exit pupil diameter 12.5 mm
Min. exit pupil diameter 3.1 mm
Max. eye relief (mm) 90 mm
Min. eye relief 90 mm
Maximum field of view 8.3 m/100m
Minimal field of view 2.5 m/100m
Twilight Factor 11.3 - 28.3
Light transmission
Reticle position 1. focal plane - FFP
Adjustment per click 5mm/100m
Elevation
Windage No
Turret Type No
Elevation Per Turn
Nr. Turret Turns No
Turret rotation direction No
Reticle illumination No
Illumination color -
Day time usable illumination No
Parallax setting
Parallax adjustment Yes - side focus
Parallax adj. range 50m - inf.
Diopter range
Fast focus eyepiece Yes
Lens coating Fully Multicoated
Waterproof Yes
Fogproof Yes
Shockproof Yes
Temperature range
Filled with Nitrogen
Length 402 mm
Tube diameter 30 mm
Objective diamater 57 mm
Eyepiece diameter 43 mm
Mount lenght 138 mm
Weight 744 g
Warranty 10 years
Made in Germany

The new tactical RANGER Premier Ballistic Optics 4-12x42 scope has finally arrived.

These scopes are amazing in low light conditions and come with a ballistic reticle for quick easy holdover when shooting at long ranges. The reticle also has windage lines for 10mph wind shifts as well as mil-dot markings for range estimation. These scopes are excellent value for money and this opportunity to purchase a great scope at a great price should not be missed.

Features:
• Quick-fire reticle with bullet drop compensation
• Multi-coated glass providing exceptional brightness and clarity
• Nitrogen filled to prevent fogging
• Long eye relief for easy and rapid acquisition of targets
• Fingertip adjustable windage and elevation turrets.

Specifications:
• Magnification: 4-12x
• Objective Diameter: 42mm
• Exit Pupil: 10.5mm
• Length: 340mm
• Eye Relief: 8cm
• Parallax Setting: 91m (100 yds)
• Field of View at 100m: 11m - 3.5m
• Windage/ Elevation: ¼ MOA.

Add a Gamo scope to your air rifle and be more accurate than ever. The 4x magnification helps with the longer shots and you can make windage and elevation adjustments. This is scope is shockproof and fog proof and includes rings.

NOTE: Air rifle not included.

Features:
• Specially design for air rifles
• Lightweight
• Magnification 4x
• Gamo 30/30 reticle
• Parallax free at 25 yards (23 metres)
• Includes rings (High).

No respectable .22 rifle should be without one. These precision scopes make your outfit complete for every type of shooting, and you won't get a sharper scope than a BSA. Their parallax is set to 50 yards, and they come with rings that fit 3/8" bases. All .22 Special scopes are waterproof, fog proof and shockproof.

All BSA optics are suitable for use on spring-powered air rifles.

Features:
• 4x magnification
• Compact 32mm Objective Size
• Fully-coated optics for solid contrast and clarity
• 100% waterproof / fogproof / shockproof
• Comfortable 3½" eye relief
• F.O.V. @ 100 yds. is 34 feet
• ¼" MOA windage and elevation adjustment
• 50-yd. fixed parallax
• Weighs 9 oz
• Includes mounting rings.

The Outdoor Outfitters Quick-Detach Torch Scope Mount for LED Lenser P14 or any 35mm Torch.

After getting frustrated with the lack of mounting options for the most popular LED Lenser Torches we have come up with a fantastic easy to use mount.

The black anodized aluminium finish matches the torch and any standard black scope’s finish.

Simply mount the included scope ring onto any 1" or 30mm scope tube. Then fit the torch mount's weaver base to the scope ring.

These are easy to install and mean you can easily remove your torch for the times when you don't need it shooting.

The torch mount is 35mm in diameter

Includes:
• 30mm Quick-Detach Scope ring
• 1" Inserts for Scope ring
• Torch Mount to fit P14, P14.2 or any 35mm Torch
• Allen Keys to fit

The RWX is Olight's brand-new pressure switch built specifically for the Warrior X (& Pro), Javelot Pro and M2R - featuring a noiseless and a sensitive pad for perfect switch manipulation. The coiled cable extends the reach of the switch to around 0.8 meters.

Features:
• Low click noise, long life electronic switch
• Powerful magnetic attachment to your Olight torch
• Coiled cable stretch from 9.8" / 25 cm to 31" / 80 cm
• Extremely low steady current 
• Compatibility: Warrior X, Warrior X Pro, Javelot Pro and M2R

When searching for a reliable and sturdy rifle mount for your flashlight, look no further than the E-WM25. Designed to attach any 1" (25.4mm) body diameter flashlight to a Picatinny-style rail, this mount easily transforms any light into a tactical tool. We recommend pairing with a remote pressure switch, for a truly hands-free experience. Made of high-strength plastic and aluminum alloy and featuring a tightening-dial, the E-WM25 Mount will keep your flashlight secure and steady during recoil.

Features:
• Fits any 1" (25.4mm) body diameter flashlight
• Attaches to any Picatinny rails (MIL-STD-1913)
• Tightener dial keeps flashlight beam steady during recoil
• Doesn't block sights or grip
• Aluminum alloy construction.

Dimensions:
• Length: 79mm / 3.11"
• Width: 35.5mm / 1.4"
• Height: 31mm / 1.22"
• Weight: 1.66oz / 47g.

Transport your firearms in style with the Deluxe Gun Bag from Manitoba. Featuring a thick padded interior to provide maximum protection during transit, the heavy-duty carry handles ensure ease of transport. With the Manitoba Deluxe Gun Bag plenty of room for extras such as ammunition with the four external zip pockets.

Available in three sizes: 42", 48", and 52".

Features:
• Thickly padded interior compartment for superior protection
• Double carry handles with a joining velcro closure for ease of transport
• 4 external zip pockets provide plenty of storage
• Hanging hook to store it safely out of the way
• Double zip pulls
• Colour: Black with grey trim.

You may have your shotgun, ammo, clothing, duck decoys & faithful dog, now protect your investment with this durable yet versatile shotgun bag. This bag includes carrying handles as well as a full-length shoulder strap for hands-free carrying. These bags are suitable for use with most firearms but were designed specifically with shotguns in mind.

Features:
• Double thickness padding.
• Carry handles.
• Full-length shoulder strap.
• Large pouch for ammo.
• 100% Polyester.
• Soft protective internal padding
• Perfect for shotguns.
• 52" / 132cm length.